1.高效过滤器包裝外包装盒完好无损无破损,无碰撞、裂开的印痕;包装(包装袋)密封性应完好无损,泡沫塑料角、保温泡沫板应齐备,型号规格、排风量、气旋流入等标志应详细、精确、齐备,有商品产品合格证等.
1. the packing box of high efficiency filter package is intact, no breakage, no collision and split. The packing (packing bag) should be intact. The foam plastic angle and insulation foam board should be available. Models, specifications, exhaust volume and cyclone inflow should be detailed, precise and complete, and have product product qualification certificate.
2.架构高效送风口架构表层无显著环境污染,无凸凹、伤疤,无刮痕、镀层,无脱落,无毛边,锈迹;高效送风口架构(粘密封胶条一边)应整平,无显著误差;高效送风口架构抗压强度应符合规定,如放到整平的表层,晃动,架构无形变、
2. The surface layer of the structure of efficient air supply outlet has no significant environmental pollution, no bumps, scars, scratches, coatings, no shedding, no hairy edges and rust marks; the structure of efficient air supply outlet (one side of the sticky sealant strip) should be leveled without significant error; the compressive strength of the structure of efficient air supply outlet should meet the requirements, such as on the leveled surface, shaking, invisible change of the structure, and no significant error.
3.接缝处高效送风口过滤纸和架构中间的密封性应严实,沒有间隙和孔眼;高效送风口和架构中间的窗户密封条,应联接、无破裂状况,看着整平,高效送风口和架构中间的窗户密封条的薄厚不适合超出8mm,压缩率为25%-30%.
3. Sealing between filter paper and structure of high-efficiency air supply outlet at joint should be strict, with no gap and hole. Sealing strip of window between high-efficiency air supply outlet and structure should be connected and without rupture. Looking at leveling, the thickness of sealing strip of window between high-efficiency air supply outlet and structure is not suitable to exceed 8mm, and the compression rate is 25%-30%.
4.滤纸单面折纸层数符合要求,纸隔板的高度应在4.0-4.5mm之间;滤纸无损伤、无污损、无脱屑、无皱褶、无打胶、无补丁;分隔板无明显损伤,平齐均匀;密封胶整齐、无裂纹,滤纸和分隔板浸润高度不大于5mm,框架滤纸和密封胶粘帖处,不应出现裂纹、气泡,孔洞和皱褶现象.http://www.sddjglq.com
4. The number of folding layers on one side of filter paper meets the requirements, and the height of the separator should be between 4.0 and 4.5mm; the filter paper should be non-damaged, non-stained, non-chipping, non-wrinkling, non-gluing and non-patching; the separator has no obvious damage and uniformity; the sealant is neat and non-cracked, the wetting height of filter paper and separator is not more than 5mm, and the filter paper and sealant paste of the frame are at the same time. Cracks, bubbles, voids and wrinkles should not occur.
